More than 200 different logo options,custom logo design is acceptable,you can have your own DIY logos!!!
This LED Door Lights can be automaticlly on when car doors open.
Working Temp:-40 degrees~ 105 degrees
Material:Aluminium alloy casing
Life span:30,000-50,000 hours
Certification:E4 / RDW
This LED lights can be installed at the bottom of the door flame and make sure the Len vertical with the ground ;
1. Pull down the inside door board first. Mark the suitable location for drilling a hole.
2. Drill the hole on the door board with our borer .
3. Inset the product from the bottom of car door ,then arrange the power cord.
4. Install the nut through the power cord upon the hole inside; Tighten the nut;
5. Connect the power cord according to the installation guide;
6. Adjust the lamp projection to the suitable place with wrench tool.
7. Reinstall the inside door board,then check the final effect.