Payment & Shipping Terms:
This LED Auto Lights can be automaticlly on when car doors open.
Outpower:3W each LED
Working Temp:-40 degrees~ 105 degrees
Material:Aluminium alloy casing
Life span:30,000-50,000 hours
This LED lights can be installed at the bottom of the door flame and make sure the Len vertical with the ground ;
1.Pull down the inside door board first. Mark the suitable location for drilling a hole.
2.Drill the hole on the door board with our borer .
3.Inset the product from the bottom of car door ,then arrange the power cord.
4.Install the nut through the power cord upon the hole inside; Tighten the nut;
5.Connect the power cord according to the installation guide;
6.Adjust the lamp projection to the suitable place with wrench tool.
7.Reinstall the inside door board,then check the final effect.